What Makes the Outemu Butterfly Switch Silent?
- How does the silent stem work?
- The Outemu Butterfly uses a TPU (thermoplastic polyurethane) soft plastic stem mold designed by xcjz and jkdk. This material dampens the sound of each keystroke, making it quieter than a standard POM stem.
- Does it come pre-lubricated?
- Yes, the listing specifies this is the Factory Lubed Edition, so the switch arrives with lubrication applied at the factory. You can install it without adding your own lube first.
Key Specifications from the Listing
- OUTEMU Butterfly Silent Linear Switch Factory Lubed Edition (10PCS): Actuation force: 37±5gf, Bottom-out force: 42gf max This tells you the switch requires a light to moderate press, suitable for fast typing where you want a consistent feel without heavy bottoming out.

OUTEMU Butterfly Silent Linear Switch Factory Lubed Edition (10PCS) - OUTEMU Butterfly Silent Linear Switch Factory Lubed Edition (10PCS): Pre-travel: 2.0mm, Total Travel: 3.7mm A 3.7mm total travel is typical for a linear switch. The 2.0mm pre-travel means there is a short initial slack before the tactile bump, which some typists prefer for a snappier response.
- OUTEMU Butterfly Silent Linear Switch Factory Lubed Edition (10PCS): 5-pin design, Silent Linear switch type The 5-pin layout is common for hot-swap boards. Confirm your keyboard's hot-swap socket accepts 5-pin switches before buying.
Compatibility and Installation
- Which keyboards work with this switch?
- The listing confirms a 5-pin design and a linear switch type. It does not list specific keyboard models. Check that your hot-swap board accepts 5-pin, linear switches with a 3.7mm travel. The supplied information does not include a compatibility list.
- Is it hot-swappable?
- The supplied details do not confirm hot-swap capability. Treat it as a switch intended for installation when the keyboard is powered off, unless your board's documentation says otherwise.
Feel and Sound
- What does the silent stem feel like?
- The TPU stem mold is described as 'soft plastic,' which suggests a slightly cushioned bottom-out compared to a rigid POM stem. The 37±5gf actuation force is light, so the switch should not feel heavy or sluggish.
- How quiet is it?
- The listing states the TPU mold 'keeps them silent during each keystroke.' No decibel measurements are provided, so treat this as a qualitative claim: the switch is designed to be quieter than a standard linear switch, but actual noise depends on your keycaps and plate.
What the Listing Does Not Confirm
The supplied information does not include operating instructions, compatibility with specific keyboard models, hot-swap support, or performance test results. For installation steps and compatibility, refer to your keyboard's manual or the manufacturer's support page.
The switch is sold as a 10-pack. If you need more or fewer switches for your layout, plan accordingly.

